So as I sit in my house all packed up for school, lonely and computer-less, I decide it’s a good time to get experimental! When I first bought my Nexus 7 tablet I decided to get a micro-USB port to USB port adapter so that I could use my Xbox 360 wireless controller to play some shooters and such on my tablet.
Today I decided it would be a fine time to test how my little tablet would handle a full fledged USB keyboard. As it turns out it works quite well!!! In fact it works better than I would have expected. There is no delay whatsoever with the keyboard input and everything seems to work including the media controls and the num-pad and buttons like Page Up and Page Down! I can also alt-tab to to cycle through recent apps and activate one. It feels very close to a laptop experience, so much so in fact that I keep reaching down for a touchpad that doesn’t exist.
The major downfall with this setup is that there seems to be no suitable replacement for a right click. This can be annoying for word processing because if you’re a less than perfect speller like myself you will miss the ability to right click for correction suggestions. Additionally since auto-corrections are built into whatever keyboard app you use, you don’t have those to save you.
I’ve been considering the viability of my 7″ Nexus 7 as a note taking tool for my classes this semester and after this brief trial run I would say that it wouldn’t be half bad! Perhaps my next step will be attempting to split the USB port into 2 and adding a mouse (I think Jellybean has mouse support).
It’s amazing how much harm a little dust can do. When I woke up this morning I found to my dismay that my desktop PC had turned itself off during the night. On the monitor was a warning stating that my CPU had overheated. EEEK!!!
Naturally the first thing I did after booting back up was install a CPU temperature monitor. I chose Core Temp for the task. After starting up Core Temp I found that all 4 cores were hovering just under 80°C at idle. This is pretty warm for a CPU that is literally doing nothing but since I was running late for work I decided it could wait.
My suspicion was that my thermal paste had somehow cracked and broken it’s seal (I have had this problem before) but I thought I would pop open the side panel and dust her out just to be on the safe side. After brandishing my trusty air duster and expelling the evil dust bunnies from my PCs depths I reevaluated the temps and looked for improvement.
After just about 5 minutes the temp (still idle) had dropped to around 70°C and well into the safe zone. SCORE!!! So the moral of the story is dust can cause your computer to overheat which makes the fans work harder and decreases the life expectancy of your hardware so keep ahead of it.
I just learned today that John Marco will soon be releasing his new book called The Forever Knight. This will be the fourth book in a series known as The Lukien Novels or The Inhumans.
I won’t go too much into the plot but this is a fantasy series filled with tragedy, romance, brutal action, as well as fantastic creatures and lands. I know I know it sounds pretty much like any fantasy seriesyou’ve ever read but trust me on this they are AWESOME! I found the fictional world interesting and unique and the plotline was phenomenal. Additionally the characters are deep and flawed, not just your cookie cutter heroes and villains.
As far as I know this book won’t be out for a few months or so so you have time to read the first three; titled The Eyes of God, The Devil’s Armor, and The Sword of Angels.
UPDATE: As it turns out the book has been delayed and won’t be out until April 2013, which is a huge bummer 😦 The bright side is that if you haven’t read the series you now have more time! I guess I’ll just have to make do with the 3 other series that I’m in the middle of.
This is the first section of a two part guide on creating a stream-able media library for videos and music. This is something I am currently going through myself and after a lot of trial and error I found something that works well for me. Our goal is to put all of our media on a local machine and stream that content from anywhere that there’s a connection. When you’re done you will be able to access your videos and music wirelessly wherever there is an internet connection!!! In Part 1 I will show you how to take your unwieldy pile of DVDs and turn it into a compact digital library!!! Then in Part 2 we will focus on the networking stuff.
Step 1:What you will need:
- First you will need a DVD drive (duh…)
- Second you need dvd ripping software. After going through lots of “free” options I finally settled on a nice little program called Make MKV which can be found here for FREE!
- Third you’re gonna need conversion/compression software. I chose a free tool called Handbrake which can be downloaded here.
- Once you have both of these programs installed grab your dvd collection and GET READY TO DIGITIZE!!!
Step 2:Ripping your DVD Collection
First We need to take your DVD and turn it into a .mkv file. An mkv is just a file format capable of holding a large number of tracks, which makes it the perfect format for dvd information. These files are gonna be BIG but don’t worry, I promise we’ll take care of that later. If you’re curious you can check out the Wikipedia Article to learn more, otherwise let’s get rippin’
- Start by picking your DVD and popping it into your disc drive.
- Next start MakeMKV.
- When MakeMKV fires up it will detect your DVD. Once it has, the button in the middle of the screen will turn from grey to colored. When you see this click it.
- Wait a few seconds and you will be presented with a hierarchy of check-boxes. You will want to uncheck all of the boxes save for the main one (usually the first, always the biggest). Expand this selection to view all of the audio tracks and subtitle tracks. I like to keep English audio and subtitles but you can keep whatever you think you’ll need. The less you check, the smaller the file will be in the end.
- Once you are satisfied with your selection click the button to select the output folder.
- Last of all click the button to begin the ripping process.
- This will take a bit so just sit tight until a popup window displays. Press OK and you’re done ripping!!!
Step 3: Compressing/Converting your Files
Now that we have our nice big .mkv file we’re gonna want to slim it down a bit. Not only that but you might decide you don’t like this .mkv fellow. After all what’s wrong with trusty old .mp4 or .mov? Well with the power of Handbrake we can custom order our video files just how we like them!
NOTE: This part takes quite a while and really sucks up your CPU so if you need to get stuff done it might be best to wait, otherwise PRESS ON!!!
- To begin, yup you guessed it, fire up Handbrake
- First click Source at the top left of the window and select Video file. Then find the .mkv file you just made and press OK
- HINT: if you never renamed the file it may be titled something like Title00
- Now it’s time to customize all of the settings. Since there are so many options I will just lead you through my personal preference.
- If you click the browse button you can select the output folder for the converted file.
- Below that is an option for Container, change this from MKV to MP4 File (unless it already says MP4 file).
- On the right you will see a list of presets. Select Android High and we will begin customizing the Audio, Subtitles, and Chapters settings.
- Start with the Audio tab. If you ripped more than one audio track from the DVD you’ll need to select the ones you want from the drop down men and click the Add Track button. If the list at the bottom contains tracks you don’t want, select them and click Remove.
- I also like to increase the Gain by clicking the Advanced button and sliding the Gain bar up to 8. This makes the playback a bit louder but is totally unnecessary.
- If you want subtitles go to the Subtitles tab and select the tracks you want from the drop down list. Then click Add
- Go to the Chapters tab and make sure the “Create chapter markers” box is checked
- Now that you have all of the settings ready to go, just muster your patience and click
- As I mentioned earlier this will hog your CPU and take quite some time so go read a book or something
Well that’s it! Now you have the ability to turn your entire DVD collection into compact MP4 files that can be played with virtually any media player on the market! Once you get comfortable with the steps feel free to play around with the settings and see what works for you. Keep an eye out for part 2 of this guide where I show you how to set up a media server for your digital collection that can be streamed to ANY DEVICE!!!